STUDIES ON ION IMPLANTATION AND ELECTRICAL PROPERTIES OF POLYACETYLENE FILMS

The effects of ion implantation on ployacetylene films PA have been studied with Ar~+, Fe~+, C1~+, I~+, Na~+ and K~+ ions in the energy range of 15—30 keV. The changes of PA films in the electrical conductivity, due to chemical doping and ion implantation in relation to their structure and depth profiles of impurities, were measured through infrared (ATR/FTIK), Rutherford backscattering spectrometry (RBS) and the four probe technique. In all cases, ion implantation of active ions exhibits the same effects as chemical doping. The formation of p-n junction is observed at the interface of implanted region and chemical doped PA substrate. The mechanism of interaction process between ion beam and polymer is also discussed.     

聚丁二烯~(13)C-NMR谱图中一个新的共振吸收峰(T_4)

<正> 最近解析锂系和铁系含乙烯基聚丁二烯的~(13)C-NMR谱图,发现并确认了一个新的共振吸收峰。即聚丁二烯反式1,4-序列的第四峰,简称T_4峰。 Furukawa等对钼系和章哲彦等对铁系等二元聚顺-1,4-1,2-丁二烯的研究都指出在聚丁二烯的~(13)C-NMR谱图上,有四个谱峰属于顺1,4-序列。本文给出其化学位     

Preparation of Polyclonal Antibodies Against Testis-specific Protease 50 and Characterization of Antibody Specificity

Introduction TheTSP50genehasbeenidentifiedasoneofthe testis specificoncogenes,whichisexpressedathigh levelsinapproximately92%ofhumanbreastcancer samples,makingitanattractivemolecularmarkerand apotentialtargetfordiagnosisandtherapy[1].Itisho mologoustomany…     

Evolution of Er^3＋ Distribution in the Oxyfluoride Glass Ceramics with Heating

The distribution characteristics of Er3+ ions doped in the oxyfluoride glass ceramics containing LaF3 nanocrystals heat-treated at 650 ℃ for different durations were investigated. The results of the integral absorption cross-section analysis demonstrated that the partition fraction of Er3+ in LaF3 nanocrystals increases with prolonging of heating time. The anomalous phenomena of Er3+ emissions in the up-and the down-conversion fluorescence spectra are well explained based on the calculated results.     

克拉霉素漂浮-生物粘附微囊的制备及性能研究

选用乳化-溶剂挥发法制备乙基纤维素载药微球(EMs), 并通过内部凝胶化法进行包衣制得海藻酸钠-乙基纤维素载药微囊(AEMs), 最后通过离子交联法进一步包衣制得壳聚糖-海藻酸钠-乙基纤维素载药微囊(CAEMs). 研究克拉霉素漂浮\|生物粘附微囊的制备工艺, 并考察微囊的体外漂浮性能、 粘附性能及体内滞留性能. 结果表明, CAEMs球形度较好, 药物包封率为72.3%~78.2%, 载药量为7.1%~12.7%. 在pH=5的醋酸缓冲液中, 6 h时的累积释放率为56.6%~70.6%, 漂浮率大于70%, 4 h时的体内滞留率为60.5%. CAEMs有望通过延长药物胃内滞留时间, 在临床用于根除幽门螺旋杆菌, 从而降低消化道溃疡的复发率.     

THERMOTROPIC LIQUID CRYSTALLINE COPOLYESTERS-SOLID STATE POLYMORPHISM

This paper offers some new evidence on the polymorphism of solid state of liquid crystalline aromatic copolyesters which were prepared in our laboratory. The effects of different treatment conditions(quenching and annealing) on solid structure have been examined mainly by DSC and X-ray diffraction. The discussion focuses on the supercooled mesophase and low temperature solid-solid transition, the shifting of double melting peaks of annealed samples and the changing of their ΔH data depending on the treatment temperature, time and thermal scanning rate.     

2''''-(1-萘亚甲基)-2-羟基苯甲酰腙的合成、晶体结构及抑菌活性

某些席夫碱化合物具有抗肿瘤、抗菌等生物活性，在生化反应中起到转氨基作用，碳氨双键是该类化合物具有抗菌活性的效应基团。而含-CONHN=CH-基团的酰腙类化合物具有特殊的生物活性和强配位能力，在农药、医药和分析试剂等方面一直是人们广泛研究的对象，某些该类化合物在治疗一些疾病和抑菌方面已有广泛的应用。为了进一步探索高效抗菌药物，本研究组在从事席夫碱及腙类化合物的合成、生物活性的测定等工作中合成了标题化合物；并测定了标题化合物对枯草芽孢杆菌、肺炎克氏菌、铜绿脓杆菌、大肠杆菌和金黄色葡萄球菌的抑菌活性。     

助剂Cu对Ni/γ-Al2O3催化剂低温还原性能影响

制备了一系列铜质量分数不同的CuNi/γ-Al2O3催化剂，进行了TPR和XRD表征并测定了该系列催化剂对苯加氢制环己烷的催化活性。结果表明，助剂Cu的负载量对低温（160 ℃）还原后催化剂的催化活性影响很大，在铜镍原子摩尔比为1∶1时，催化剂具有较高的催化活性和稳定性；添加铜组分可促进镍在载体表面分散，使负载NiO的还原温度降低，催化活性提高。     

地锦草总黄酮最佳提取分离工艺的研究

采用四因素三水平的正交实验方法,对地锦草总黄酮的最佳提取工艺进行了探索.采用乙酸乙酯萃取、酸碱沉淀、铅盐沉淀3种方法,对其最佳分离工艺进行了探索.正交实验结果表明:温浸法中四因素对地锦草黄酮的影响顺序为乙醇浓度>样液比>提取温度>提取时间.通过实验得到了地锦草总黄酮的最佳提取工艺:以10倍体积的50%的乙醇水溶液在80℃浸提1 h.地锦草总黄酮的最佳分离方法为酸碱沉淀法.这些数据为中药地锦草的开发和应用提供了科学依据.     

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。